Main Menu Product lists





PENDULUM Pendulum hardnessHARDNESS TESTER

The TQC Pendulum Hardness Tester has a lot of unique features that ease defining hardness by the König and/or Persoz method as described in ISO 1522. Both methods work on the principle that the damping time of a pendulum oscillating on a sample indicates the hardness.

The instrument has an easy menu-driven interface with jog dial. The automated electronic counting mechanism is not affected by reflections from the surrounding area. The water-level is located on the test specimen, rather than on the instrument’s base. Once the instrument is leveled further calibration is not required. The gas-spring supported transparent draft cover allows easy access to all parts of the instrument. Pendulum hardness

TQC’s Pendulum Hardness Tester is a modulair system. The instrument itself can be used for both the König and- Persoz method. Both pendulums should be ordered separately. After placing the correct pendulum, switching between the two measuring methods only takes a push of a button. The Pendulum is positioned fully automatically by means of a stepper motor. Also the release of the Pendulum is automated through electro-magnetic system. The end of a test is indicated by a visual and acoustic signal.

The TQC Pendulum Hardness Tester base device is available as a 110 Volt and a 220 Volt model.

SP0500
TQC Pendulum Hardness Tester 230V, Pendulum base device, without PendulumPendulum hardness

SP0501
TQC Pendulum Hardness Tester 110V, Pendulum base device, without Pendulum

SP0505
TQC König Pendulum for hardness test

SP0510
TQC Persoz Pendulum for hardness test

ติดต่อเรา


CSS website templates by JustDreamweaver.com