Main Menu Product lists

Adhesion Test

เครื่องทดสอบการยึดเกาะสีpaint plate


The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) andreas cross, wet film thickness gauge from 50 up to 160 microns, edge grind checker for correct roundess of edges, wet film apllicator ranging from 0 to 180 µm as well as levelling test providing an indication of the viscosity of the coating. Delivery includes cutting tool and tape.

cross cut tester

Phynix Cross Cut Tester

By using the Cross Hatch Cutter one can proof the adhesion quality of a coating on a base material. We offer different versions for inspections based on DIN EN ISO 2409 or based on ASTM D3359-02.

อ่านรายละเอียดเพิ่มเติม --> เครื่องทดสอบการยึดเกาะสี


TQC Cross Cut Adhesion Test Kit CC2000cross cut

The TQC CC2000 Cross Cut Adhesion Test KIT is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.

อ่านรายละเอียดเพิ่มเติม --> เครื่องทดสอบการยึดเกาะสี



CSS website templates by