Main Menu Product lists





Adhesioncross cut

CROSS CUT ADHESION TEST KIT (MASTER PAINT PLATE)

The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) andreas cross, wet film thickness gauge from 50 up to 160 microns, edge grind checker for correct roundess of edges, wet film apllicator ranging from 0 to 180 µm as well as levelling test providing an indication of the viscosity of the coating. Delivery includes cutting tool and tape.

Tape For Adhesion Test according ISO 2409:2003 andpaint plate
Tape For Adhesion Test according ISO 2409:1999 can be ordered separately as well.

SP3000
TQC Cross Cut Adhesion Test Kit (Master Paint Plate)
- Dimensions: 100 x 55 mm.
- Cross cut test ASTM and ISO
- Wet film thickness test (50-160µ, in steps of 10µ).
- Levelling test (1, 1.5 and 2 mm)
- Film applicator (0-180µ, in steps of 20µ).
- Edge radius 2, 3, 4 and 5 mm

 

Model: TQC CROSS CUT ADHESION TEST KIT CC2000cross cutcross cut

The TQC CC2000 Cross Cut Adhesion Test KIT is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.

The cutting knife of the TQC Cross Cut Adhesion Test CC2000 is easy to exchange without the use of extra tools. The self positioning knife bracket of the TQC Cross Cut Adhesion Test CC2000 ensures equal pressure on the cutting knife.

Each TQC Cross Cut Adhesion Test KIT CC2000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.

SP1690
TQC Cross Cut Adhesion Test CC2000, 6 blades, cutting distance 1 mm, acc. to EN ISO
For use on coatings up to 60 µm on hard substrates.


SP1691
TQC Cross Cut Adhesion Test CC2000, 6 blades, cutting distance 2 mm, acc. to EN ISO
For use on coatings up to 60 µm on soft substrates and coatings from 61 to 120 µm on both hard and soft substrates.


SP1692
TQC Cross Cut Adhesion Test CC2000, 6 blades, cutting distance 3 mm, acc. to EN ISO
For use on coatings from 121 µm to 250 µm on both hard and soft substrates.


SP1699
TQC Cross Cut Adhesion Test CC2000, 11 blades, cutting distance 1 mm, acc. to ASTM
For use on coatings up to 50 µm.


SP1700
TQC Cross Cut Adhesion Test CC2000, 11 blades, cutting distance 1.5 mm, acc. to ASTM
For use on coatings from 50 to 125 µm.


Model: Phynix Cross Cut Tester

By using the Cross Hatch Cutter one can proof the adhesion quality of a coating on a base material. We offer different versions for inspections based on DIN EN ISO 2409 or based on ASTM D3359-02.

Characteristics
cross cut tester

  1.  Cylindrical cutting system with 6 cutting edges and  6 grinds each
  2.  Longer tool life against tools with 1 or 4 cutting edges
  3.  Free turnable hand grip ensures the right position of the grinds on the surface during cutting
  4.  Hex key for easy change of cross hatch blades
  5.  Magnifying glass for confident evaluation of the edges cut
  6.  Brush to clean the cut surface 

cross cut tester
 Delivery schedule
 Cross Hatch Cutter
  Cutting head with multiple blades
 Sturdy carrying case
  Hex key
 Magnifying glass and brush
  Operation manual german/english

  Models


Standard

Coating thickness (µm)

Blade quantityx distance (mm)

DIN EN ISO 2409

0 - 60

6 x 1

60 - 120

6 x 1

120 - 250

6 x 1

ASTM D 3359-02

0 - 50

11 x 1

50 - 125

11 x 1


 

 

 

 


CSS website templates by JustDreamweaver.com